Can I Charge A Lithium Motorcycle Battery With Regular Charger?

No. you can’t charge a lithium battery with a regular charger. This is because lithium batteries are made of lithium and carbon compared to other alkaline-built batteries.

Different batteries have specific chargers that are compatible. Interchanging their usage would result in explosions and battery damage.

To charge the lithium motorcycle battery, use specific lithium battery chargers, as discussed in this article. Ensure the battery corresponds to the charger used. Failure to use the specified charger will lead to slow charging and explosions at the extreme.

Do You Need A Special Charger To Charge A Lithium Motorcycle Battery?

Definitely YES.

It would be best if you had a special charger compatible with the lithium battery. Never use the lead acid-alkaline chargers on your lithium battery.

What is a special lithium charger? A special lithium battery charger is specifically manufactured to charge the lithium-ion battery.

The batteries require a special charger since their charging process is different from the rest. Despite lithium battery charging being a chemical reaction, the process is bound by several characteristics.

Do You Need A Special Charger To Charge A Lithium Motorcycle Battery

These characteristics include overcharge, undervoltage, cell charge imbalance, and current discharge. Due to these factors, you need a special charger to ensure efficient charging.

Use the battery management system to control temperature and voltage parameters for efficient charging. The BMS will help in cell charge balancing with a special charger to ensure accurate level charging unlike in the normal charger.

Can I Charge A Lithium Motorcycle Battery With Regular Charger?

Absolutely NO.

Using a regular battery charger on your lithium battery will cause damage to the battery. Use standard battery chargers on your lead-acid batteries.

A regular charge will also cause delayed charging with a partially charged battery. If you have to use regular chargers such as the lead-acid chargers, use the alternating current to direct the main current supply.

If the regular charger has a low absorption profile, use it to charge the lithium battery. For precautions, ensure to disconnect the charger once it is fully charged. Never leave the battery in a trickle maintenance mode.

Can I Charge A Lithium Motorcycle Battery With Regular Charger

Using the regular lead-acid charger will damage the battery management system (BMS). The BMS acts as a sensor in lithium batteries. They can sense the temperature changes and the voltage input and output.

If you plan to use direct-to-direct current chargers, always consider changing them to their LIFEPO4 models for battery safety.

What Is The Best Way To Charge A Lithium Battery?

Cases of energy drained motorcycle batteries can occur along the journey. You need not worry. The following are the best ways to charge your lithium battery.

Best Way To Charge A Lithium Battery
  1. Use of a special battery charger
  2. Jump starting the motorcycle battery

Jumpstart your battery if you have no access to a special lithium battery charger.

Use Of A Special Battery Charger

The good news is that the various lithium battery chargers apply the same technique to charge your battery.

Use Of A Special Battery Charger

Step 1 – Identify the type of battery in your motorcycle

Start by verifying the type of battery your bike uses. You can determine its shape, size, and design. For more accurate information, seek the manual guide stuck on the battery.

Step 2 – Get a compatible battery charger

Using the above information about the battery type, check the store and purchase a compatible charger.

This step is crucial as it will determine the charging rate and protect your lithium battery pack while charging. Only use lithium battery chargers even if the charger works best with lead-acid, AGM, or Gel batteries.

You can consult the battery’s manufacturer for accurate choices.

Step 3 – Disconnect the battery from your motorcycle

For a safer process, disconnect the battery terminal and remove the battery. Charging should occur when the battery is disconnected to avoid damaging other motorcycle components.

Disconnect the battery from your motorcycl

Turn off the motorcycle before disconnecting the battery.

Step 4 – Connect the battery charger to the battery

Place the battery in a stable upright position. Use a carton or a piece of wood to place the battery.

Connect the terminals appropriately with the black cable on the negative terminal while the red cable on the positive terminal. Ensure a firm fix to enhance charging.

Leave the battery in the charging mode while monitoring.

Step 5 – Confirm the charging intervals

If using a digital charger, read the voltage levels from the indicator screen.

You may have to disconnect the charging system for the analog lithium chargers to take the voltage reading. Set the voltmeter at the maximum voltage of the charger.

With complete charging, the reading should be 12.70 V and above. For standard charge level, the readings will vary between 12 V to 12.60 V. If the reading is below 12 V, consider having it checked by a professional for possible faultiness.

Step 6 – Return the battery onto your motorcycle

With the charging process completed, disconnect the charging system and return the battery to the motorcycle. Be sure to replace the battery in its original position and then fix back the terminals.

Ensure a tight fit for the terminals to improve the motorbike’s performance. Return the cover casing and ignite your bike. Your bike is ready to resume the journey.

Jump Starting The Motorcycle Battery

Though a rare case, jump-start your motorcycle with another bike or car when you aren’t in a position to get a charger.

Get a jump-starting car or bike and a pair of jump-starting cables.

Have both the jump-starting vehicle and your bike battery’s terminals exposed for cable connection. For a car, please turn it off to avoid excess current exchange. While using other bikes of the same voltage capacity, you can leave it turned on.

Jump Starting The Motorcycle Battery

To jump-start, your bike, attach the cable to the battery terminals and ignite it. Leave the dead bike on for some time to warm up the engine. Five minutes will be enough.

Disconnect the jumper cables and continue enjoying the journey. Upon reaching the garage, check the battery and charge it thoroughly to avoid embarrassing moments.


You can only use a special charger to charge your lithium-ion batteries. With a lithium charger, your battery is protected from overcharge and imbalanced charges in the cells.

Never use a regular charger on your lithium battery. Even if it is charging, this will reduce its lifespan with time. 

Ensure you purchase a lithium battery with a battery management system to protect your battery from damage. BMS will equally check for any abnormalities for appropriate actions before total damage.

Be keen to follow the given procedure while charging. Also, consider adhering to the safety precautions, both for you and the battery.

Leave a Comment